You are here: Home > News >
5052h32 aluminum sheet manufacturers where to find, 5052h32 aluminum plate price per ton
2019-07-29

5052h32 aluminum sheet manufacturers where to find, 5052h32 aluminum plate price per ton
5052h32 aluminum sheet price
5052 alloy aluminum sheet is a hot product on the market. Henan Mingtai Aluminum Co., Ltd. produces 5052h32 aluminum plate manufacturer. It has a deep understanding of the performance characteristics of 5052 alloy aluminum plate. Here is a description of the al5052 aluminum plate.
5052h32 aluminum plate manufacturers where to find, 5052h32 aluminum sheet price per ton
5 series aluminum plate represents product 5052 alloy aluminum plate, 5083 aluminum plate, 5086 aluminum plate, 5005 aluminum plate, 5182 aluminum coil, 5 series represents the density of AL5052h32 aluminum plate?
The density of aluminum is small (ρ=2.7g/cm3), which is about 1/3 of iron, and the melting point is low (660°C). Aluminum is a face-centered cubic structure, so it has a high plasticity (δ: 32~40%, ψ : 70~90%), easy to process, can be made into various profiles and plates. Good corrosion resistance; but the strength of pure aluminum is very low, and the annealing state σb value is about 8kgf/mm2, so it is not suitable for structural materials.
The density of the AL5052 aluminum plate The density is 2.72 g/cm3.
Chemical composition: aluminum Al: balance; copper Cu: ≤ 0.10; magnesium Mg: 2.2 ~ 2.8; zinc Zn: ≤ 0.10; manganese Mn: ≤ 0.10; chromium Cr: 0.15 ~ 0.35; iron Fe: ≤ 0.40; : ≤ 0.05, total: ≤ 0.15.
5052 aluminum plate introduction
5052 h32 price
AL5052h32 aluminum plate density 2.72g/cm3, 5052 aluminum plate is AL-Mg alloy aluminum plate, magnesium is the main alloying element in 5052 alloy aluminum plate, is the most widely used rust-proof aluminum, the strength of this alloy is high, especially Anti-fatigue strength: high plasticity and corrosion resistance, can not be heat-treated and strengthened, good plasticity in semi-cold hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing. Henan Mingtai Aluminum Co., Ltd. produces 5052 aluminum plate manufacturers, which produce aluminum plates in various states. The 6061 aluminum plate produced by Mingtai Aluminum has smooth surface, no need for milling, and is even more acclaimed by customers.
AL5052 aluminum plate specifications
The thickness of the aluminum plate is: 0.15mm-50mm, the width is: 100mm-2000mm, and the length is: 1000mm-9000mm.
Roll thickness: 0.05mm-15mm, width: 15mm-2000mm
Insulation aluminum plate thickness: 0.3mm-0.9mm Width: 500mm-1000mm Length: no limit
Non-slip aluminum plate thickness: 1mm-10mm Width: 1000mm-1500mm Length: 2000-3000mm
Embossed aluminum plate thickness: 0.1mm-0.9mm Width: 500mm-1200mm Length: no limit
The 5052h32 aluminum sheet manufacturer produced by Henan Mingtai Aluminum Co., Ltd. has 6 semi-continuous casting production lines, 10 continuous casting and rolling production lines, and 44 other large processing equipments. The annual output reaches 600,000 tons. The surface of the 5052 aluminum plate produced has no peeling. Bubbles, rough surface and local mechanical damage, no cracks, no corrosion spots and traces of nitrates on the surface of the aluminum plate.
Mingtai Aluminum's large aluminum plate manufacturer, China's top 500 manufacturing industry, the quality of the products produced is guaranteed, the annual production capacity is 770,000 tons, Henan Mingtai Aluminum Co., Ltd. Tel: 15237181905.
Email: sales01@mingtai-al.com
Official website: https://www.mtalum.com